Today: Get My No Fail, Easy Cookbook Series for 60% OFF
Buy Now

DIY Toy Shelves from a Used Tire

Pin PostReview Post
Table of Contents

Thanks to the partnership I have with Discount Tire on this post, I am sharing my recycled tire DIY project for holiday gift inspiration.

Don't want to lose this recipe? Get it emailed to you directly! Enter your email below. Plus you'll get a free e-cookbook and amazing recipes sent to you daily.

Commercialization abounds during the holidays. I can spend with the best of them, but I also like it when I come up with an eco-friendly idea that doesn’t blow my budget. I was intrigued when I saw the challenge that Discount Tire put out to use a recycled tire for a DIY holiday gift. I immediately had an idea. With three boys, toy storage space is at a premium in our world. They are perfect for the backyard where the boys can play with their toys!!!

How to Make Toy Shelving from a Used Tire

If you have any leftover tires stored in your garage (doesn’t everybody?), I know something you can do with them. This toy storage shelf unit is a super recycling idea that doesn’t cost much to put together and I think it looks really awesome. It would make a fun Christmas present that would be just as perfect for a three-year-old or a thirty-three-year-old! Minus the toy cars. 😉

Car Tire Shelving DIY

No, it’s not difficult to make. Here’s what worked for our tire shelf:

  • 1 auto tire
  • 1 8’ 1X6 pine board (not pressure treated and if you have wood scraps that are the right size for your tire, use ‘em)
  • 12 #6X1” panhead screws
  • 1 can quick-dry grey spray primer that bonds to plastic
  • 1 can quick-dry spray paint that bonds to plastic

Things to Make with Tires

Give your old tire a good scrubbing first and let it dry.

Measure Shelves

Making Shelves for Tire

Cool DIY Shelf for Toys

For the middle board, measure the diameter of the inside circle and add 2” to each side. For the top and bottom boards, use the inside center circle diameter. Using a mitre saw for cutting the shelves is a lot quicker, but you could use a handsaw.

Take your center board and wedge it into the tire. Repeat with the top and bottom boards.

How to Put Shelves in a Tire

Use a metal drill bit and predrill through the side of the tire and into the boards, using a bit slightly smaller than the screw size. This will keep the wood from splitting.

How to Turn a Tire into a Shelf

If you want the shelves and tire the same color, you can assemble now. If you would like the shelves a different color, disassemble and prime everything separately.

Spray tire and shelves with primer (do two coats). Once it is dry, spray paint the tire and shelves (ours needed two coats).

DIY Tire Shelf for Toys

When paint is thoroughly dry, reassemble.

Discount Tire

The next time you go get your tires changed, stop by Discount Tire. They’re the world’s largest independent tire and wheel retailer. Most know them as Discount Tire, but in the western states they do business under the name of America’s Tire. They operate more than 900 stores across the country and have been in business for over 50 years so you know they’re doing something right. We’ve gotten all of our replacements there and we’ve always been pleased with the quality products. Also, their staff not only does expert work, they’re pleasant to deal with. That counts. For more information, including locations, visit their website.

How about you? Have any old tires in your garage? Go check and get going. You’ve still got time to make this eco-friendly Christmas gift idea!

Proudly Prepared by the Spaceships Kitchen

This recipe was developed, tested, cooked and photographed by the Spaceships Kitchen. From our dinner table to yours, we hope you think it's out of this world!

You May Also Like

get digital lazy cookbooks
16108

Free Membership!

Get all our new recipes straight to

your inbox plus a BONUS

download in your first email! ❤